-
Boron carbide has a high neutron absorption capacity. The neutron capture cross-section is high and the capture energy spectrum is wide. The thermal cross-section of 10B is as high as 347 × 10-24 cm2, second only to a few elements such as gadolinium, samarium, and cadmium. At the same time, compared with pure elements B and Gd, B4C is low in cost, does not produce radioisotopes, has low secondary ...
Read More
-
1. Thermally conductive fillers commonly used in insulating polymers 1. Nitride filler and its application The nitride fillers are mainly aluminum nitride (AlN), boron nitride (BN) and silicon nitride (Si3N4), etc. due to their high thermal conductivity, good electrical insulation performance, excellent high temperature resistance and excellent dielectric properties, etc. Characteristics and widel...
Read More
-
Aluminum nitride powder has high purity, uniform particle size, high surface activity, and the effect of insulation and thermal conductivity is very obvious. The powder can be applied to engineering plastics to improve the performance and mechanical strength of engineering plastics, and has good injection molding performance. Used in composite materials, it has good matching with semiconductor sil...
Read More
-
Nano titanium nitride (TiN) powder, black powder, cubic crystal type. The particle size is 20-40 nm, 100 nm. The purity is 99%+. Nano titanium nitride has high melting point, high hardness, high chemical stability and excellent electrical and thermal conductivity. The main application of nano titanium nitride: 1. Application in PET engineering plastics: A small amount of nano titanium nitride powd...
Read More
-
1. The lubricity of boron nitride Boron nitride came out more than 100 years ago. Its earliest application polymorph is hexagonal boron nitride as a high-temperature lubricant, abbreviated as: h-BN, or a-BN, or g-BN (that is, graphite boron nitride), Hexagonal boron nitride is absolutely smooth, and the friction coefficient between the powders is very low. Each layer of its atomic structure contai...
Read More
-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
-
Due to its small particles and large specific surface area, nano titanium nitride can be dispersed in other materials to form a conductive network, which greatly improves the conductive performance of the composite material. Therefore, nano-titanium nitride is a material with broad application prospects. Among them, the applications of nano-titanium nitride TIN in electrochemistry are as follows: ...
Read More
-
The following describes the application of nano TIN titanium nitride in water electrolysis: 1) Application in hydropower analysis hydrogen electrode Since solid polymer electrolyte water electrolysis is an acidic environment, alternative materials represented by N-based multi-element alloys are only suitable for neutral and alkaline environments. Nano TiN can be a good carrier material due to its ...
Read More
-
In order to explore the ultraviolet protection performance of nanofibers, the ultraviolet shielding nano titanium dioxide (TiO2) was added to the polyacrylonitrile (PAN) solution, and pure PAN and composite PAN/TiO2 nanofiber membranes were prepared. Scanning electron microscopy and UV transmittance analysis were used. The instrument analyzed the microscopic morphology and UV protection performanc...
Read More
-
Advantages of nano ferroferric oxide black magnetic powder: 1. Nano Iron oxide black magnetic powder has the characteristics of high permeability, low coercivity and low remanence; 2. Nano Fe3O4 black magnetic powder has good dispersibility, is not easy to agglomerate, and has strong magnetism; 3. One-dimensional nano ferroferric oxide black magnetic powder has good magnetic permeability and good ...
Read More
-
(1) Black nano Fe3O4 iron oxide: Size: 30nm, PH: 8-10, SSA:4-5g/cm3 Black nano ferroferric oxide is a mixed valence oxide of iron with a melting point of 1597°C. It is insoluble in water but soluble in acid solutions. Vk-EF01 has anti-corrosion effect. For example, the bluing of steel parts (also known as blue-burning and baking blue) is to use the oxidation effect of alkaline oxidizing solution t...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
