13929258449

admin@satnano.com

Search

Home

Search

  • 04

    Aug

    Nano ATO Antimony Tin Oxide powder can be used in thermal insulation materials

    In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
    Read More
  • 28

    Jul

    Borax-ammonium chloride method is a commonly used method for synthesizing boron nitride

    This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
    Read More
  • 28

    Jul

    The boron anhydride method is a commonly used method for the synthesis of boron nitride

    The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
    Read More
  • 28

    Jul

    How to prepare and test the thermal insulation and infrared blocking properties of cesium tungsten oxide nanoparticles modified PVC film

    In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
    Read More
  • 28

    Jul

    With Cesium Tungsten bronze Nanoparticles, the Age of Smart Insulation Has Come

    Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
    Read More
  • 04

    Aug

    Four Common Nanomaterials Used in Transparent Thermal Insulation Coatings

    Nano thermal insulation coatings can be used to absorb ultraviolet rays from sunlight, and are often used in current decoration buildings. Water-based nano transparent thermal insulation coating not only has the effect of high efficiency and energy saving, but also has the comprehensive advantages of green environmental protection, health and safety. As an alternative product of solvent-based glas...
    Read More
  • 02

    Aug

    Comparison of thermal insulation test between cesium-doped tungsten oxide CSxWO3 glass and ordinary glass

    Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
    Read More
  • 02

    Aug

    Nano cesium tungsten oxide plays an important role in glass thermal insulation

    The promotion and application of energy-saving technologies has reached a consensus in the world, and many countries have successively issued policies. In building energy consumption, a large proportion is lost through glass doors and windows. Similarly, in the hot summer, the exposure of sunlight through the car glass is unbearable for drivers and passengers, which accelerates the aging of the ve...
    Read More
  • 08

    Aug

    A brief introduction to ICP-MS for chemical total elemental analysis

    ICP-MS Inductively Coupled Plasma Mass Spectrometer is an analytical instrument that combines ICP technology and mass spectrometry. It can simultaneously measure dozens of trace elements. The instrument covers a wide range of elements, including alkali metals, alkaline earth metals, transition Metals and other metalloids, rare earth elements, most halogens and some non-metallic elements. Principle...
    Read More
  • 11

    Aug

    Is there any relationship between electrical conductivity and thermal conductivity of materials?

    In the world of electronic materials there are two important material properties "electrical conductivity" and "thermal conductivity". Generally speaking, as long as the electrical conductivity of the material is good enough, the thermal conductivity is also good. For example, copper, silver, aluminum and other metal materials have good electrical and thermal conductivity. Therefore, most metal ma...
    Read More
  • 11

    Aug

    A passivation layer of metallic aluminum nanoparticles for protection

    In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
    Read More
  • 01

    Sep

    What are the common application areas of nano boron carbide powder

    Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. It has a Mohs hardness of about 9.5. Black glossy crystals. The hardness is lower than that of industrial...
    Read More
< 11 12 13 14 15 16 17 18 19 20 >
[  A total of  24  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!