-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
The singular properties of nanomaterials include: ①Surface effect The surface area of a spherical particle is proportional to the square of the diameter, and its volume is proportional to the cube of the diameter, so its specific surface area (surface area/volume) is inversely proportional to the diameter. As the particle diameter becomes smaller, the specific surface area will increas...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
Mould of car blower impeller solution 1. The conformal waterway design that fits the wall surface has a cooling effect that traditional waterways can’t match and improves production efficiency. 2. The well-distributed conformal waterway design provides outstanding cooling consistency, ensures uniform shrinkage of the product, and improves product quality 3. The integrated printing and processing m...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
The phase change toughening of yttrium stabilized nano zirconia and the toughening effect of nanoparticles are used to improve the comprehensive mechanical properties of the alumina matrix. Adding different contents of nano 3Y-ZrO2 to the alumina matrix, the comprehensive mechanical properties of the material with a content of 15wt% of nano ZrO2 reach the best (flexural strength 766.74MPa, fractur...
Read More
-
Nano zirconia has important application value in national defense, electronics, high-temperature structural and functional ceramics, especially in high-tech fields such as surface coatings. The unique low thermal conductivity of nano-zirconia is an excellent material for thermal insulation coatings to improve the thermal insulation effect. Its high corrosion resistance, high hardness and high wear...
Read More
-
In recent years, with the development of science and technology, nanotechnology has begun to be applied to all aspects of our lives, and the fields involved are also increasing. Especially when this emerging technology meets our traditional industry ceramics, the combination of the two improves the product added value of the ceramic industry. Alumina ceramics have a series of excellent characteris...
Read More
-
Nano powder has various applications in modern industry. One of them is added to printing inks and coatings to provide UV resistance. Because of its very small size and high specific surface area, nano powder can bring remarkable effect in a very small amount. So, what nano powders can be added to printing inks and coatings to play the role of UV resistance? This article will provide you with a br...
Read More
-
Copper powder and copper alloys powder have excellent physical and chemical properties, such as high conductivity, thermal conductivity, and corrosion resistance, and are widely used in the power industry, thermal management systems, nuclear power plants, and aerospace industry. High strength, wear-resistant, and corrosion-resistant copper alloys are used for automotive parts and daily necessities...
Read More
-
There are different types of 3D printing according to different materials, among which metal powder is one of the main raw materials for 3D printing, and high-purity metal powder needs to be used as the raw material. The relevant parameters of the powder, such as chemical composition, particle shape, particle size and distribution, flowability, etc., have a great impact on the quality of 3D printi...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
