-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
1. Nano cerium oxide improves the anti-ultraviolet aging performance of polymers The 4f electronic structure of nano CeO2 is very sensitive to light absorption, and the absorption band is mostly in the ultraviolet region (200-400nm). It has no characteristic absorption of visible light and has good transmittance. Ordinary ultra-fine CeO2 for UV absorption has long been used in the glass industry: ...
Read More
-
1. Nano zinc oxide is an active agent and vulcanizing agent for rubber. Due to the small size effect and large surface effect of nano-materials, the function of nano-zinc oxide in rubber formulations is not only a high-active agent, but also improves wear resistance. It can improve the adhesive force of the rubber frame material, increase the deformation ability and reduce the heat generation and ...
Read More
-
Application Analysis of Nano Tungsten Trioxide Nano WO3 yellow tungsten has a large specific surface area and significant surface effect. It is a good catalyst. It can be used as both a main catalyst and an auxiliary catalyst, and it has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and r...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
Mould of car blower impeller solution 1. The conformal waterway design that fits the wall surface has a cooling effect that traditional waterways can’t match and improves production efficiency. 2. The well-distributed conformal waterway design provides outstanding cooling consistency, ensures uniform shrinkage of the product, and improves product quality 3. The integrated printing and processing m...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
Cu is a transition metal and has a special electronic structure and electronic gain and loss properties that are different from other metals. It can show good catalysis for different chemical reactions and is widely used in the field of catalysts. When the size of CuO particles is as small as nanometers, due to the special characteristics of multiple surface free electrons and high surface energy ...
Read More
-
Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
