-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
The singular properties of nanomaterials include: ①Surface effect The surface area of a spherical particle is proportional to the square of the diameter, and its volume is proportional to the cube of the diameter, so its specific surface area (surface area/volume) is inversely proportional to the diameter. As the particle diameter becomes smaller, the specific surface area will increas...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
When using copper powder as the conductive filler to prepare the conductive ink, what is the appropriate amount of copper powder added, and what specific effect does the added amount of copper powder have on the conductive performance of the conductive ink. Printed electronics is an advanced electronics manufacturing technology that has emerged and popularized in recent years. Conductive ink is a ...
Read More
-
Copper powder is inexpensive and has a wide range of uses. Recently, many customers have inquired about copper powder, so how to choose copper powder? What kind of copper powder is more appropriate? The key is to look at the required performance and application. Commonly used copper powders can be roughly divided into spherical and quasi-spherical copper powders, dendritic copper powders, flake co...
Read More
-
Among metals, the conductivity of copper powder conductive paste is second only to silver, with high bonding strength and low cost, which makes the advantages of copper powder conductive paste particularly prominent. So, what is the performance of copper powder conductive paste in all aspects of application? 1. The conductivity of copper powder conductive paste Copper powder conductive paste requi...
Read More
-
The chemical reduction method of silver coated copper powder refers to the process of using a reducing agent to reduce the ions in the main salt to elemental form and depositing on the surface of the substrate with autocatalytic ability in a metastable solution system. When the reducing agent is oxidized on the catalytically active surface, free electrons are generated. These free electrons can re...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
Cu is a transition metal and has a special electronic structure and electronic gain and loss properties that are different from other metals. It can show good catalysis for different chemical reactions and is widely used in the field of catalysts. When the size of CuO particles is as small as nanometers, due to the special characteristics of multiple surface free electrons and high surface energy ...
Read More
-
The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
Read More
-
Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
