-
1. The lubricity of boron nitride Boron nitride came out more than 100 years ago. Its earliest application polymorph is hexagonal boron nitride as a high-temperature lubricant, abbreviated as: h-BN, or a-BN, or g-BN (that is, graphite boron nitride), Hexagonal boron nitride is absolutely smooth, and the friction coefficient between the powders is very low. Each layer of its atomic structure contai...
Read More
-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
-
1 Zirconium carbide is used in cemented carbide Zirconium carbide is an important high-temperature structural material with high melting point, high strength and corrosion resistance. It can improve the strength and corrosion resistance of cemented carbide. Its excellent characteristics make it have a lot of application space in cemented carbide. Using zirconium carbide instead of expensive tantal...
Read More
-
The following describes the application of nano TIN titanium nitride in water electrolysis: 1) Application in hydropower analysis hydrogen electrode Since solid polymer electrolyte water electrolysis is an acidic environment, alternative materials represented by N-based multi-element alloys are only suitable for neutral and alkaline environments. Nano TiN can be a good carrier material due to its ...
Read More
-
In order to explore the ultraviolet protection performance of nanofibers, the ultraviolet shielding nano titanium dioxide (TiO2) was added to the polyacrylonitrile (PAN) solution, and pure PAN and composite PAN/TiO2 nanofiber membranes were prepared. Scanning electron microscopy and UV transmittance analysis were used. The instrument analyzed the microscopic morphology and UV protection performanc...
Read More
-
Advantages of nano ferroferric oxide black magnetic powder: 1. Nano Iron oxide black magnetic powder has the characteristics of high permeability, low coercivity and low remanence; 2. Nano Fe3O4 black magnetic powder has good dispersibility, is not easy to agglomerate, and has strong magnetism; 3. One-dimensional nano ferroferric oxide black magnetic powder has good magnetic permeability and good ...
Read More
-
(1) Black nano Fe3O4 iron oxide: Size: 30nm, PH: 8-10, SSA:4-5g/cm3 Black nano ferroferric oxide is a mixed valence oxide of iron with a melting point of 1597°C. It is insoluble in water but soluble in acid solutions. Vk-EF01 has anti-corrosion effect. For example, the bluing of steel parts (also known as blue-burning and baking blue) is to use the oxidation effect of alkaline oxidizing solution t...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
