13929258449

admin@satnano.com

Search

Home

Search

  • 09

    Jun

    What are the matters needing attention in the packaging, storage and transportation of nano powder

    1. Packaging of nano powders Most nanopowders will agglomerate again due to extrusion or moisture absorption, so the packaging of nanomaterials is very important. We will choose packaging materials according to the type, character and quantity of products purchased by customers, usually vacuum packaging in aluminum bags, or storage in water, we will tailor a reliable packaging solution for your go...
    Read More
  • 09

    Jun

    Characterization of Nanopowders---Determination of Specific Surface Area

    The specific surface area is the surface area (㎡/g) of the substance per unit mass. It is one of the most important physical properties of ultra-fine powder materials, especially nano-powder materials. It is used to evaluate their activity, adsorption, catalysis and other properties. important physical properties. Therefore, in the research, manufacture and application of various ultrafine powder ...
    Read More
  • 09

    Jun

    Characterization of Nanomaterials - Composition Analysis of Nanopowders

    Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
    Read More
  • 09

    Jun

    Characterization of Nanomaterials-Structural Analysis of Nanopowders

    Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
    Read More
  • 04

    Aug

    Nano ATO Antimony Tin Oxide powder can be used on antistatic materials

    Nano ATO has excellent electrical and optical properties, and is widely used in coatings, plastics, textiles, polymer films, electronic products and other fields by virtue of its good electrical conductivity and antistatic properties. Nano ATO is much better than other antistatic materials, such as graphite, surfactant, metal powder, etc. The interaction of uniformly dispersed ato conductive nano ...
    Read More
  • 04

    Aug

    Nano ATO Antimony Tin Oxide powder can be used in thermal insulation materials

    In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
    Read More
  • 01

    Jul

    The difference between Fisher particle size and laser particle size, and share the sample dispersion method in particle size test

    Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
    Read More
  • 01

    Jul

    How to Prepare of Samples for Nanoparticle Transmission Electron Microscopy (TEM)

    Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
    Read More
  • 28

    Jul

    Borax-ammonium chloride method is a commonly used method for synthesizing boron nitride

    This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
    Read More
  • 28

    Jul

    The boron anhydride method is a commonly used method for the synthesis of boron nitride

    The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
    Read More
  • 28

    Jul

    How to prepare and test the thermal insulation and infrared blocking properties of cesium tungsten oxide nanoparticles modified PVC film

    In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
    Read More
  • 28

    Jul

    With Cesium Tungsten bronze Nanoparticles, the Age of Smart Insulation Has Come

    Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
    Read More
< 11 12 13 14 15 16 17 18 19 20 >
[  A total of  25  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!