-
1.Lithium battery The development of conductive materials is one of the elements in the development of new energy. Carbon nanotubes can be used to improve the electrical conductivity of electrode materials, and the improvement of the conductivity of electrode materials (anode and cathode) is important for improving energy storage performance. Carbon nanotubes have very good electrical conductivity...
Read More
-
Preparation of kerosene-based magnetic fluid of Fe3O4 In this experiment, analytically pure ferric chloride, ferric chloride and ammonia (NH3 content 25%) were used to prepare magnetic particles of Fe3O4 according to chemical coprecipitation method. The chemical reaction equation is 2FeCl3·6H2O+FeCl2·4H2O+8NH3·H2O= Fe3O4+8NH4Cl+24H2O (1) In the dissolution process, FeCl2·4H2O blue-green crystals a...
Read More
-
As the anode material of lithium ion battery, silicon nanopowder has the highest theoretical specific capacity (up to 4200 mAh/g), which is much higher than the carbon powder widely used at present, but the biggest disadvantage of silicon powder as the negative electrode of lithium ion battery is the process of alloying with lithium. In the case of a large volume change, the active material is det...
Read More
-
Carbon nanotechnology began in the 1990s, and its presentation has greatly improved and improved the national economy. Its internal structure is of a hierarchical type and can exhibit special chemical properties in the field of catalysis and devices. At the same time, new nanomaterials appear after graphene and nanotubes, and new carbon nanomaterials have become a hot topic in many research fields...
Read More
-
Although carbon nanotubes have unique mechanical, electrical, and thermal properties, due to the strong van der Waals force and π-π interaction between carbon nanotubes, they are also easily agglomerated, and carbon nanotubes are modified or function Transformation is the main means to solve these problems. According to the existing research results, the functional modification of carbon nanotubes...
Read More
-
Many people think that graphite powder is carbon powder. In fact, there is still a big difference between graphite powder and carbon powder. Next, SAT NANO will introduce the difference between the two in detail; Toner generally refers to toner, which is widely used in printer cartridges. The main component of toner (also known as toner) is not carbon, but most of it is composed of resin and carbo...
Read More
-
In order to explore the ultraviolet protection performance of nanofibers, the ultraviolet shielding nano titanium dioxide (TiO2) was added to the polyacrylonitrile (PAN) solution, and pure PAN and composite PAN/TiO2 nanofiber membranes were prepared. Scanning electron microscopy and UV transmittance analysis were used. The instrument analyzed the microscopic morphology and UV protection performanc...
Read More
-
Advantages of nano ferroferric oxide black magnetic powder: 1. Nano Iron oxide black magnetic powder has the characteristics of high permeability, low coercivity and low remanence; 2. Nano Fe3O4 black magnetic powder has good dispersibility, is not easy to agglomerate, and has strong magnetism; 3. One-dimensional nano ferroferric oxide black magnetic powder has good magnetic permeability and good ...
Read More
-
(1) Black nano Fe3O4 iron oxide: Size: 30nm, PH: 8-10, SSA:4-5g/cm3 Black nano ferroferric oxide is a mixed valence oxide of iron with a melting point of 1597°C. It is insoluble in water but soluble in acid solutions. Vk-EF01 has anti-corrosion effect. For example, the bluing of steel parts (also known as blue-burning and baking blue) is to use the oxidation effect of alkaline oxidizing solution t...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
