-
As a sensor material: TiO2 nanopowder can be used not only for moisture sensitive and pressure sensitive components, but also as a sensor material for detecting multiple gases. TiO2 nanoparticle as a catalyst carrier: Since researchers discovered strong interactions between certain metals and TiO2 carriers in 1978, most of the scientists in the field of catalysts in various countries have used TiO...
Read More
-
Specification of titanium dioxide nanopowder: The particle size is very small: an average particle size of 5 nm. Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air. High catalyt...
Read More
-
Physical properties of tantalum powder The thickness of Ta powder is due to the atomic number of Ta being 73, the atomic mass is close to 181, the density is 16.65g/m3, the texture is blue-gray, the hardness is 6-6.5, and the melting point is as high as 2996°C, second only to carbon, Tungsten, tantalum and niobium; Tantalum is a rare transition metal suitable for replacing platinum as a laboratory...
Read More
-
Nano silica powder is a filler for reinforcing high-temperature vulcanized silicone rubber. The silica nanopowder aggregates have a good reinforcing effect on the silicone rubber. After adding SAT NANO nano silica powder to the rubber, a microcrystalline region with silica as a nucleus is formed, which increases the physical cross-linking point. Crystallization is more likely to occur and the stre...
Read More
-
1. What is tungsten disulfide powder? Ultrafine WS2 powder is a new type of lubricating and anti-wear material with excellent lubricating properties and its dry friction factor is only 0.03. Tungsten disulfide is one of the best raw materials for friction lubrication in the scientific community. Under static conditions, its dry friction factor is 0.07. Under dynamic conditions, the dry friction fa...
Read More
-
1, thermal silica gel and thermal epoxy resin Ultra-high thermal conductivity nano AlN composite silica gel has good thermal conductivity, good electrical insulation, wide electrical insulation temperature (operating temperature -60 ° C - 200 ° C), low consistency and good construction performance. The products have reached or exceeded the imported products, because they can replace the similar im...
Read More
-
A preparation method of a high-capacity silicon powder doped lithium battery anode slurry, which improves the capacity of the material by adding silicon nanopowder in the preparation process of the conventional anode slurry, and can meet the requirement of high energy density of the lithium ion battery And through the steps of thickener solution preparation, dispersing powder, high viscosity stirr...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The organic/inorganic nanocomposite formed by dispersing the inorganic filler in a nanometer size in a general plastic matrix is called nanoplastic. In nanocomposites, nano-plastics have excellent properties such as high strength, heat resistance, high barrier properties, flame retardancy and excellent processability due to the nano-size effect of the dispersed phase, large specific surface area a...
Read More
-
1. Application of ultrafine copper powder on MLCC internal electrodes Copper has the advantages of small resistivity, small electromigration speed, and low price. It is an ideal substitute for silver-palladium internal electrodes, but its chemical properties are more active. In the air, powdery copper with large specific surface area is easily Oxidation, the surface will form a film of Cu2O and Cu...
Read More
-
The addition of nano SiO2 powder as an admixture to cement-based materials can improve many of the properties of cement-based materials. A large number of research results show that adding appropriate amount of SiO2 nanopowder to cement-based materials, due to the volcanic ash effect of nano SiO2 particle, nucleation effect and micro-filling effect, can significantly improve the early strength of ...
Read More
-
Cubic silicon carbide, Beta SiC, is a synthetic high-performance material (only a small amount of high-purity cubic silicon carbide exists in nature). It is called "cube" because its structure belongs to the cubic system (diamond crystal). This structure also determines its own superior physical and chemical properties. B-SiC has a Mohs hardness range of 9.5 to 9.75, which is close to the most Moh...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
