-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
Read More
-
The formation of a stable dispersion system, in addition to using electrostatic repulsion, that is, the negative charges adsorbed on the surface of the particles repel each other, to prevent the adsorption/aggregation between particles and finally form large particles and stratify/settlement, but also use. The theory of the steric hindrance effect, whereby particles that have adsorbed negative cha...
Read More
-
The preparation methods of CNTS loaded metal nanoparticles are mainly physical preparation and chemical preparation methods. The most commonly used is chemical preparation method. The chemical preparation method is generally uniformly loaded with metal nanoparticles on the carrier CNTS. The general process of chemical preparation is that the metal front drive is restored to atoms, and the metal at...
Read More
-
Introduction: In recent years, the use of nanotechnology in thermal insulation materials has gained significant attention in the field of material science. Nanoparticles with unique physical and chemical properties have become an attractive alternative to bulk materials for providing thermal insulation. In this article, we will discuss the commonly used nanoparticles as thermal insulation material...
Read More
-
The measurement deviation of particle size analyzer is influenced by various factors, and the following are some possible factors: The physical properties of the sample: The shape, size, density, and color of the sample can all affect the measurement deviation of the particle size analyzer. Measurement environment: Measuring environmental factors such as temperature, humidity, and pressure may lea...
Read More
-
Measuring the thickness of the coating layer in nanoparticles requires the use of advanced instruments and techniques. The following are possible measurement methods: Transmission Electron Microscope (TEM): This is a microscope that utilizes high-density electron beams to observe and measure the structure and properties of nanoparticles. For the measurement of the thickness of the coating layer, T...
Read More
-
Silicon carbide particle reinforced aluminum matrix composite material, abbreviated as SiCp/Al composite material, refers to the addition of silicon carbide particles (SiCp) to aluminum matrix alloys to form a composite material with high strength, high stiffness, and high heat resistance. This composite material has been widely used in fields such as aerospace, shipbuilding, vehicles, electronic ...
Read More
-
Ultrafine nano powder is an important product of the development of modern science and technology, which is widely used in such fields as electronic products, biomedicine and so on. The particle size of ultra-fine nano powder has an important impact on its performance, so the development of particle size detection technology of ultra-fine nano powder has also become a hot topic. As a company speci...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
