-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
-
Titanium diboride nanopowder has the characteristics of high melting point and high hardness, and is resistant to molten metal corrosion, and is often used for preparing composite ceramics. A*STAR (Agency for Science, Technology and Reseach), Singapore's largest research institute, has successfully improved the strength and thermal properties of materials by adding titanium diboride to nickel-base...
Read More
-
The silicon carbide nanopowder has high purity, small particle size distribution range and high specific surface area; nano-silicon carbide has stable chemical properties, high thermal conductivity, small thermal expansion coefficient, high hardness and Mohs hardness of 9.5. Nano silicon carbide wear-resistant, high temperature resistant, corrosion resistant, acid and alkali resistant solvents. 1....
Read More
-
The aluminum nitride nanopowder has the characteristics of high specific surface area, high hardness, high thermal conductivity and high insulation. It is a diamond-like nitride, stable to 2200 ° C, high room temperature strength, good compatibility with the substrate interface, and can improve compounding. Thermal and dielectric properties, mechanical properties and wear resistance of the materia...
Read More
-
New energy vehicles, communications and portable devices require lithium-ion batteries for high capacity and high endurance. Lithium-ion batteries urgently need to be updated to increase capacity, cycle and size. At present, the silicon-carbon negative electrode of lithium battery is all kinds of carbon materials mainly composed of graphite, and its theoretical capacity is only 372 mAh/g. In pract...
Read More
-
Due to the influence of diseases, aging, frequent traffic accidents and other factors, the number of cases of bone injury has increased year by year. According to statistics, there are 3 million orthopedic cases every year in China, and the demand for bone substitute materials is increasing. In recent years, bone substitute materials represented by hydroxyapatite have gradually become the darling ...
Read More
-
Aluminum nitride (AlN) is a new type of ceramic material with excellent comprehensive properties. It has excellent thermal conductivity, reliable electrical insulation, low dielectric constant and dielectric loss, non-toxicity and thermal expansion coefficient matching with silicon. The excellent characteristics of the series are considered to be ideal materials for a new generation of high-concen...
Read More
-
Nano gold powder refers to tiny particles of gold with a diameter of 1 to 100 nm. It has high electron density, dielectric properties and catalytic properties, and can bind to a variety of biomacromolecules without affecting its biological activity. Preparation of gold nanoparticles with different particle sizes by chloroauric acid reduction. The effect on human skin is as follows: By massaging th...
Read More
-
Silicon nitride Si3N4 is a non-oxide high temperature ceramic structural material. Powdered Si3N4 can be prepared by reacting a mixture of SiCl4 vapor and NH3 gas. Powdered Si3N4 is unstable to air and water. Powdered Si3N4 can form a pungent odor, a gas commonly used as a refrigerant and a poorly soluble acid when it is in contact with water. Powdered Si3N4 can generate N2 and contact with air. a...
Read More
-
The gold we usually see is golden yellow, but the nano gold powder is pink; the iron can not be ignited at normal temperature, but the nano iron powder can ignite. Why did these metals become tiny nanoparticles and the properties changed completely? Now let's take a closer look at the skills of nano gold particles and see how they have wonderful functions. 1.Smart microcircuit Behind the LCD scree...
Read More
-
The purpose of surface modification of ultrafine powder is: 1. In order to improve or change the dispersibility of powder particles; 2. Improve durability, such as resistance, light resistance, heat resistance, weather resistance, etc.; 3. Improve particle surface activity; Adding new physical, chemical and mechanical properties and new functions to the surface of the particles to increase the add...
Read More
-
First, capsule modification Capsule modification is a surface modification method in which a film of a uniform thickness and a film having a certain thickness is coated on the surface of the powder particles. Rong et al. encapsulated TiO2 composite particles coated with Al2O3 and SiO2 with polystyrene, which effectively improved the absorbance and stability of the material. Zhu Liqun and other met...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
