-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. It has a Mohs hardness of about 9.5. Black glossy crystals. The hardness is lower than that of industrial...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
-
The formation of a stable dispersion system, in addition to using electrostatic repulsion, that is, the negative charges adsorbed on the surface of the particles repel each other, to prevent the adsorption/aggregation between particles and finally form large particles and stratify/settlement, but also use. The theory of the steric hindrance effect, whereby particles that have adsorbed negative cha...
Read More
-
The preparation methods of CNTS loaded metal nanoparticles are mainly physical preparation and chemical preparation methods. The most commonly used is chemical preparation method. The chemical preparation method is generally uniformly loaded with metal nanoparticles on the carrier CNTS. The general process of chemical preparation is that the metal front drive is restored to atoms, and the metal at...
Read More
-
Introduction: In recent years, the use of nanotechnology in thermal insulation materials has gained significant attention in the field of material science. Nanoparticles with unique physical and chemical properties have become an attractive alternative to bulk materials for providing thermal insulation. In this article, we will discuss the commonly used nanoparticles as thermal insulation material...
Read More
-
Measuring the thickness of the coating layer in nanoparticles requires the use of advanced instruments and techniques. The following are possible measurement methods: Transmission Electron Microscope (TEM): This is a microscope that utilizes high-density electron beams to observe and measure the structure and properties of nanoparticles. For the measurement of the thickness of the coating layer, T...
Read More
-
With the continuous progress of technology, the application of thermal conductive nanomaterials in modern industry is becoming increasingly widespread. From electronic devices to the automotive industry, their use has become an industry standard in today's high-tech field. As a company specializing in the production of thermal conductive nanomaterials, Dongguan SAT NANO understands the importance ...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
