-
Particle size: The size of the particles is called particle size, usually the particle size of spherical particles is expressed by diameter/particle size, and the particle size of cubic particles is expressed by side length. Particle size is the diameter of a particle. However, most of the particles in practice are irregular. Therefore, in order to describe the size of the particles more convenien...
Read More
-
Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
Read More
-
The size of the particles is called the particle size of the particles, which may also be referred to as particle size. Particle size or particle size refers to particle diameter. Of course, for non-spherical particles, the particle size is related to the measurement criteria and statistical methods, and the particle size can only be "equivalent". The percentage (or cumulative percentage) of parti...
Read More
-
In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
