-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
The singular properties of nanomaterials include: ①Surface effect The surface area of a spherical particle is proportional to the square of the diameter, and its volume is proportional to the cube of the diameter, so its specific surface area (surface area/volume) is inversely proportional to the diameter. As the particle diameter becomes smaller, the specific surface area will increas...
Read More
-
Mould of car blower impeller solution 1. The conformal waterway design that fits the wall surface has a cooling effect that traditional waterways can’t match and improves production efficiency. 2. The well-distributed conformal waterway design provides outstanding cooling consistency, ensures uniform shrinkage of the product, and improves product quality 3. The integrated printing and processing m...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
When using copper powder as the conductive filler to prepare the conductive ink, what is the appropriate amount of copper powder added, and what specific effect does the added amount of copper powder have on the conductive performance of the conductive ink. Printed electronics is an advanced electronics manufacturing technology that has emerged and popularized in recent years. Conductive ink is a ...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
Read More
-
The thermal properties of nanomaterials are inseparably linked to the motion behavior of molecules and atoms in the material. such as the melting point of nanomaterials. The melting point of a solid substance is fixed when its form is large in size. For nanoparticles, due to the small particles, the high surface energy of the particles, the large number of surface atoms, the incomplete coordinatio...
Read More
-
The size of the particles is called the particle size of the particles, which may also be referred to as particle size. Particle size or particle size refers to particle diameter. Of course, for non-spherical particles, the particle size is related to the measurement criteria and statistical methods, and the particle size can only be "equivalent". The percentage (or cumulative percentage) of parti...
Read More
-
In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
Read More
-
The value of nanomaterials is not only limited to its good performance in the information industry, biomedicine, aerospace and environmental protection, etc., but also that it can go deep into the details of life, and through the transformation of traditional manufacturing, it will have a subtle impact on human clothing, food, housing and transportation. Materials are the material basis for all te...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
