-
Alumina powder can be used in abrasives, ceramics, medicine, cosmetics, aerospace, thermal media, etc. Today the editor will talk about a very small class of alumina applications: thermally conductive alumina powder for electronic potting adhesives in thermally conductive media. First of all, electronic encapsulants are mainly divided into three categories: silicone encapsulants, epoxy encapsulant...
Read More
-
By mixing a small amount of nano silica into concrete, ultra-high strength and ultra-high durability concrete can be easily prepared. At present, a large number of research results have proved that nano SiO2 has a good modification effect on cement. The cement paste doped with nano silica has reduced fluidity, shortened setting time, and significantly improved early strength. Nano-doped nano silic...
Read More
-
As a product with a wide range of performance, high temperature alumina can be used in many different industries, including the application in catalysts. However, in order to achieve the specified use standard, it can be carried out according to the operations specified below. 1. Adsorbents: This type of carrier is a porous substance with a large specific surface area. High temperatur...
Read More
-
The antibacterial materials used in the packaging industry are mainly antibacterial plastics, which are used in the form of films, hollow containers and totes. Organic antibacterial agents have been limited in their application in the packaging industry due to their safety issues, while natural antibacterial agents have attracted people's attention with high efficiency and safety. 1. Antibacterial...
Read More
-
1) Characteristics of aluminum powder, Aluminum is a silver-gray metal, which is relatively divided and suitable for pigment aluminum powder. Aluminum powder paste is a mixture of pigment aluminum powder and solvent. Its uses and characteristics are roughly the same as aluminum powder. Due to the mass of 26.98, the relative density of 2.55, the purity of 99.5%, the melting point of aluminum is 685...
Read More
-
The role of metals aluminum in refractory materials: Plastic phase forming: The metal lattice will slip under the action of stress, which has plastic characteristics. Compared with the hard inorganic material particles, it will play the plastic forming characteristics during the forming process, so that the same The density of the green body prepared under the forming pressure is higher than that ...
Read More
-
What is Silver Nano powder? Silver Nano powder is the metal element that make the particle size to nanometer. Nano-sized particles, which is 1nm=1 billionth of a meter, is measured in nanometers. Nano silver has an early impact in healthcare, also other industries. What is nanotechnology? It is the technology of processing the material down to several nano meter range (1nm=10-9mm, 1/10,000 o...
Read More
-
Flake aluminum powder is also known as aluminum powder pigment. Aluminum powder pigment is one of the important metal pigments. It is a high-purity (99.3%~99.97%) metal aluminum as raw material, which is produced by wet ball milling process. Compared with other pigments, aluminum powder pigments have their unique performance characteristics. Characteristics of flake aluminum powder 1) Covering cha...
Read More
-
Application of flake aluminum powder 1) Industrial coatings The industrial coatings market includes the following areas: can coatings, coil coatings, general industrial coatings, marine coatings, powder coatings, anti-corrosion coatings, roof coatings, etc. The three types of coatings with the largest amount of aluminum powder pigments are: roof coatings (increasing aesthetics, extending the...
Read More
-
Because of its low density, good oxidation resistance, high temperature resistance and corrosion resistance, silicon carbide has promoted the development of silicon carbide in the field of brake pads. Silicon carbide composite material is a material that can meet the high temperature of 1650-1700 ℃. Adding silicon carbide powder in the production of brake pads can more effectively improve the stab...
Read More
-
1. Application of Nano Iron Oxide in Decoration Materials In pigments, nano-iron oxide is also called transparent iron oxide (iron penetration). The so-called transparency does not specifically refer to the macroscopic transparency of the particles themselves, but refers to the dispersion of pigment particles in the organic phase to make a layer of paint film (or oil film). When light is irradiate...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, among which β type has better performance than α type. Type β has higher...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
