-
Nano particles are used in automotive coatings due to their special effects, which can improve the traditional performance of coatings and give them new functions, greatly improving product quality, and providing new opportunities for improving the technical content of automotive coatings. 1. Anti-scratch and stone-strike nano automotive coatings The surface of the car body is often scratched by m...
Read More
-
Black silicon carbide is made of quartz sand, petroleum coke and high-quality silica as the main raw materials, and is smelted at high temperature in a resistance furnace. The raw materials used in the manufacture of green silicon carbide, such as black silicon carbide, are roughly the same, and industrial salt is added as a reactant and accelerator to react in a resistance furnace. In terms of it...
Read More
-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
-
Many people think that graphite powder is carbon powder. In fact, there is still a big difference between graphite powder and carbon powder. Next, SAT NANO will introduce the difference between the two in detail; Toner generally refers to toner, which is widely used in printer cartridges. The main component of toner (also known as toner) is not carbon, but most of it is composed of resin and carbo...
Read More
-
1 Zirconium carbide is used in cemented carbide Zirconium carbide is an important high-temperature structural material with high melting point, high strength and corrosion resistance. It can improve the strength and corrosion resistance of cemented carbide. Its excellent characteristics make it have a lot of application space in cemented carbide. Using zirconium carbide instead of expensive tantal...
Read More
-
Nano alumina has special mechanical and chemical properties, such as high chemical stability, high hardness, high temperature wear resistance and corrosion resistance, etc., and can be used as the enhanced second phase of the metal matrix composite to be applied to the surface of the device, thereby improving its resistance Wear and corrosion resistance. The results of X-ray diffraction analysis a...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
Mould of car blower impeller solution 1. The conformal waterway design that fits the wall surface has a cooling effect that traditional waterways can’t match and improves production efficiency. 2. The well-distributed conformal waterway design provides outstanding cooling consistency, ensures uniform shrinkage of the product, and improves product quality 3. The integrated printing and processing m...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
