-
Particle size D 0.1 ～ 2.5μm, length 10-50um, purity 99+, gray-green. Silicon carbide whisker is a kind of high-strength whisker-like (one-dimensional) single crystal with many excellent mechanical properties such as high strength and high modulus. Mainly used in ceramics, high-temperature components in the aerospace field, main strong bearing blocks, large mud pumps, etc. Physical characteristics:...
Read More
-
Boron carbide, also known as black diamond, has a molecular formula of B₄C, usually grayish black powder. It is one of the three hardest materials known (the other two are diamond, cubic phase boron nitride), used in tanker armor, body armor, and many industrial applications. Its Mohs hardness is 9.3. Hard black shiny crystals. Harder than industrial diamond, but higher than silicon carbide. Compa...
Read More
-
Tungsten carbide powder (WC) is the main raw material for the production of cemented carbide, chemical formula WC. The full name is Wolfram Carbide. Tungsten carbide powder is a black hexagonal crystal with metallic luster, hardness similar to diamond, and a good conductor of electricity and heat. The melting point is 2870 ° C, the boiling point is 6000 ° C, and the relative density is 15.63 (18 °...
Read More
-
Nano-scale silicon carbide has the following characteristics: 1. Its microhardness is 2840 ～ 3320kg / mm², its hardness is between corundum and diamond, and its mechanical strength is higher than corundum. 2. It has a strong ability to absorb infrared waves, can be used as infrared absorbing and transmitting materials, made into functional films or fibers, and can also be used for polishing and gr...
Read More
-
Boron carbide has a high neutron absorption capacity. The neutron capture cross-section is high and the capture energy spectrum is wide. The thermal cross-section of 10B is as high as 347 × 10-24 cm2, second only to a few elements such as gadolinium, samarium, and cadmium. At the same time, compared with pure elements B and Gd, B4C is low in cost, does not produce radioisotopes, has low secondary ...
Read More
-
1. Thermally conductive fillers commonly used in insulating polymers 1. Nitride filler and its application The nitride fillers are mainly aluminum nitride (AlN), boron nitride (BN) and silicon nitride (Si3N4), etc. due to their high thermal conductivity, good electrical insulation performance, excellent high temperature resistance and excellent dielectric properties, etc. Characteristics and widel...
Read More
-
Because of its low density, good oxidation resistance, high temperature resistance and corrosion resistance, silicon carbide has promoted the development of silicon carbide in the field of brake pads. Silicon carbide composite material is a material that can meet the high temperature of 1650-1700 ℃. Adding silicon carbide powder in the production of brake pads can more effectively improve the stab...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, among which β type has better performance than α type. Type β has higher...
Read More
-
1. Titanium carbide tool materials AL2O3-TIC ceramics is the earliest development of composite ceramic tool system. Hard particles of nano-titanium carbide with a mass fraction of 15-40% are dispersed in the matrix, which not only improves the hardness of the material, but also improves the fracture toughness of the material. The cutting performance of the composite AL2O3-TIC ceramic tool is much ...
Read More
-
Black silicon carbide is made of quartz sand, petroleum coke and high-quality silica as the main raw materials, and is smelted at high temperature in a resistance furnace. The raw materials used in the manufacture of green silicon carbide, such as black silicon carbide, are roughly the same, and industrial salt is added as a reactant and accelerator to react in a resistance furnace. In terms of it...
Read More
-
1. The lubricity of boron nitride Boron nitride came out more than 100 years ago. Its earliest application polymorph is hexagonal boron nitride as a high-temperature lubricant, abbreviated as: h-BN, or a-BN, or g-BN (that is, graphite boron nitride), Hexagonal boron nitride is absolutely smooth, and the friction coefficient between the powders is very low. Each layer of its atomic structure contai...
Read More
-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
