-
1 Zirconium carbide is used in cemented carbide Zirconium carbide is an important high-temperature structural material with high melting point, high strength and corrosion resistance. It can improve the strength and corrosion resistance of cemented carbide. Its excellent characteristics make it have a lot of application space in cemented carbide. Using zirconium carbide instead of expensive tantal...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
The beta silicon carbide whiskers produced by SAT NANO are needle-shaped cubic crystals. As an atomic crystal, it has low density, high melting point, high strength, high modulus, low thermal expansion rate, and excellent properties such as wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance. It is mainly used for metal substrates and ceramic substrates. , ...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. It has a Mohs hardness of about 9.5. Black glossy crystals. The hardness is lower than that of industrial...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
-
1 Modified high-strength new material Nano SiC powder particles have good compatibility in polymer composite materials, good dispersion and good basic bonding, the tensile strength of modified high-strength nylon alloy is more than 100% higher than that of ordinary PA6, and the wear resistance is improved by more than 2.5 times. Users have responded well. It is mainly used for polymer parts of arm...
Read More
-
Silicon carbide particle reinforced aluminum matrix composite material, abbreviated as SiCp/Al composite material, refers to the addition of silicon carbide particles (SiCp) to aluminum matrix alloys to form a composite material with high strength, high stiffness, and high heat resistance. This composite material has been widely used in fields such as aerospace, shipbuilding, vehicles, electronic ...
Read More
-
Class I and Class II materials are two fundamental concepts in the field of materials science, which are used to describe the crystal structure types of materials and are often applied in the research of materials such as semiconductors and metals. So, how do we distinguish between Class I materials and Class II materials? A simple method is to distinguish based on the density of the material. Com...
Read More
-
Ultra fine silicon carbide powder is an excellent inorganic material with excellent characteristics such as high chemical inertness, high hardness, and high melting point, making it widely used in the manufacturing industry. However, due to its low surface activity, it is difficult to achieve its excellent performance in certain industrial application scenarios. Therefore, the study of surface mod...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
