-
As the anode material of lithium ion battery, silicon nanopowder has the highest theoretical specific capacity (up to 4200 mAh/g), which is much higher than the carbon powder widely used at present, but the biggest disadvantage of silicon powder as the negative electrode of lithium ion battery is the process of alloying with lithium. In the case of a large volume change, the active material is det...
Read More
-
BN-SAT08 High-temperature Release Agent Product Characteristics Environment Friendly: Boron nitride is environmentally friendly, non-toxic, non-polluting Chemical Properties: Strong non-stick properties in high temperature environment, stability in high temperature Physical Properties: Electrical insulator, low dielectric constant, good thermal conductivity and high lubricity Product Fe...
Read More
-
1, thermal silica gel and thermal epoxy resin Ultra-high thermal conductivity nano AlN composite silica gel has good thermal conductivity, good electrical insulation, wide electrical insulation temperature (operating temperature -60 ° C - 200 ° C), low consistency and good construction performance. The products have reached or exceeded the imported products, because they can replace the similar im...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The aluminum nitride nanopowder has the characteristics of high specific surface area, high hardness, high thermal conductivity and high insulation. It is a diamond-like nitride, stable to 2200 ° C, high room temperature strength, good compatibility with the substrate interface, and can improve compounding. Thermal and dielectric properties, mechanical properties and wear resistance of the materia...
Read More
-
Aluminum nitride (AlN) is a new type of ceramic material with excellent comprehensive properties. It has excellent thermal conductivity, reliable electrical insulation, low dielectric constant and dielectric loss, non-toxicity and thermal expansion coefficient matching with silicon. The excellent characteristics of the series are considered to be ideal materials for a new generation of high-concen...
Read More
-
Silicon nitride Si3N4 is a non-oxide high temperature ceramic structural material. Powdered Si3N4 can be prepared by reacting a mixture of SiCl4 vapor and NH3 gas. Powdered Si3N4 is unstable to air and water. Powdered Si3N4 can form a pungent odor, a gas commonly used as a refrigerant and a poorly soluble acid when it is in contact with water. Powdered Si3N4 can generate N2 and contact with air. a...
Read More
-
The purpose of surface modification of ultrafine powder is: 1. In order to improve or change the dispersibility of powder particles; 2. Improve durability, such as resistance, light resistance, heat resistance, weather resistance, etc.; 3. Improve particle surface activity; Adding new physical, chemical and mechanical properties and new functions to the surface of the particles to increase the add...
Read More
-
Boron carbide chemical formula B4C. Glossy black crystals with a relative density of 2.52, a melting point of 2350 ° C, and a boiling point above 3500 ° C. Chemically stable, insoluble in water and various acids, soluble in molten alkali. Harder than diamond but higher than silicon carbide, Mohs hardness is 9.3. High thermal neutron capture ability, wear resistance, and semiconductor conductivity....
Read More
-
Boron carbide, also known as black diamond, has a molecular formula of B₄C, usually grayish black powder. It is one of the three hardest materials known (the other two are diamond, cubic phase boron nitride), used in tanker armor, body armor, and many industrial applications. Its Mohs hardness is 9.3. Hard black shiny crystals. Harder than industrial diamond, but higher than silicon carbide. Compa...
Read More
-
Boron carbide has a high neutron absorption capacity. The neutron capture cross-section is high and the capture energy spectrum is wide. The thermal cross-section of 10B is as high as 347 × 10-24 cm2, second only to a few elements such as gadolinium, samarium, and cadmium. At the same time, compared with pure elements B and Gd, B4C is low in cost, does not produce radioisotopes, has low secondary ...
Read More
-
1. Thermally conductive fillers commonly used in insulating polymers 1. Nitride filler and its application The nitride fillers are mainly aluminum nitride (AlN), boron nitride (BN) and silicon nitride (Si3N4), etc. due to their high thermal conductivity, good electrical insulation performance, excellent high temperature resistance and excellent dielectric properties, etc. Characteristics and widel...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
