13929258449

admin@satnano.com

Search

Home

Search

  • 23

    Dec

    Chemical reduction method for silver coated copper powder production

    The chemical reduction method of silver coated copper powder refers to the process of using a reducing agent to reduce the ions in the main salt to elemental form and depositing on the surface of the substrate with autocatalytic ability in a metastable solution system. When the reducing agent is oxidized on the catalytically active surface, free electrons are generated. These free electrons can re...
    Read More
  • 23

    Dec

    3D printer can make zirconia ceramic dental

    Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
    Read More
  • 29

    Dec

    Nano copper oxide powder is widely used in catalysts

    Cu is a transition metal and has a special electronic structure and electronic gain and loss properties that are different from other metals. It can show good catalysis for different chemical reactions and is widely used in the field of catalysts. When the size of CuO particles is as small as nanometers, due to the special characteristics of multiple surface free electrons and high surface energy ...
    Read More
  • 29

    Dec

    Analysis of the advantages and disadvantages of the replacement reaction process and the preparation of silver coated copper powder

    The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
    Read More
  • 14

    Jan

    Nano cuprous oxide Cu2O-a standout in the field of high-end antibacterial

    Nano cuprous oxide Cu2O is a kind of photoelectric material with a wide range of uses. The main uses are as follows: Nano cuprous oxide Cu2O is used as anti-fouling primer for ships in the coating industry to prevent marine organisms from adhering to the bottom of ships; Nano cuprous oxide Cu2O is used as a colorant for red glass and red enamel in the glass and ceramic industries; Nano cuprous oxi...
    Read More
  • 14

    Jan

    The antibacterial performance of nano copper oxide CuO on some bacteria can be as high as over 99.9%

    Because nano copper oxide CuO is a p-type semiconductor, it has holes (CuO) +, which may interact with the environment and play an antibacterial or antibacterial effect. Studies have shown that nano CuO has good antibacterial ability against pneumonia and Pseudomonas aeruginosa. The antibacterial process of metal oxide nano-copper oxide CuO can be simply described as: under the excitation of light...
    Read More
  • 04

    Mar

    Silver coated copper powder is widely used, and chemical composite method is the mainstream process for preparation

    In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
    Read More
  • 04

    Mar

    What is the common uses of nano copper oxide powder

    Primary particle size parameters of nano copper oxide:20nm, 50nm, 100 nanometers, purity 99% Min. Application of nano copper oxide: 1. Nano copper oxide is an important multifunctional inorganic material, which is widely used in printing and dyeing, ceramics, glass and medicine and other fields. 2. Nano-copper oxide can also be used as a burning rate catalyst for rocket propellants. It can no...
    Read More
  • 04

    Mar

    Silver plated copper powder can be widely used in conductive adhesives, conductive coatings, polymer pastes

    The silver plated copper powder adopts electroless plating technology to form silver plating with different thicknesses on the surface of ultra-fine copper powder and nickel powder; it has good oxidation resistance, good electrical conductivity, low resistivity, high dispersion and high stability. Silver plated copper powder is an ideal conductive powder and is an ideal material for low cost and h...
    Read More
  • 14

    Apr

    How to modify and disperse nanoparticles

    Chemical modification and dispersion is to use the surface groups of nanoparticles to form chemical bonds with reactive organic compounds. The nanoparticles are soluble in organic media due to the branched chains or groups of organic compounds on the surface. dispersion in. There are usually two ways of chemical modification: one is to use the end groups of macromolecules to chemically react with ...
    Read More
  • 14

    Apr

    Various densities of powders (bulk density, tap density, true density, apparent density, bulk density and bulk density)

    Density is a physical quantity that reflects the properties of matter. The properties of matter refer to a property that matter itself has but can be distinguished from each other. People often feel that substances with high density are "heavy" and substances with low density are "lighter". "Heavy" and "light" essentially refer to the magnitude of density. Density is a property of matter, it does ...
    Read More
  • 14

    Apr

    How to effectively control the agglomeration of nanoparticle powders

    Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
    Read More
< 11 12 13 14 15 16 17 18 19 20 >
[  A total of  22  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!