13929258449

admin@satnano.com

Search

Home

Search

  • 09

    Jun

    Characterization of Nanopowders---Determination of Specific Surface Area

    The specific surface area is the surface area (㎡/g) of the substance per unit mass. It is one of the most important physical properties of ultra-fine powder materials, especially nano-powder materials. It is used to evaluate their activity, adsorption, catalysis and other properties. important physical properties. Therefore, in the research, manufacture and application of various ultrafine powder ...
    Read More
  • 09

    Jun

    Characterization of Nanomaterials - Composition Analysis of Nanopowders

    Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
    Read More
  • 09

    Jun

    Characterization of Nanomaterials-Structural Analysis of Nanopowders

    Characterization and testing technology is the fundamental way to scientifically identify nanomaterials, understand their diverse structures, and evaluate their special properties. The main purpose of characterization of nanomaterials is to determine some physical and chemical properties of nanomaterials, such as morphology, size, particle size, chemical composition, crystal structure, band gap an...
    Read More
  • 04

    Aug

    Nano ATO Antimony Tin Oxide powder can be used in thermal insulation materials

    In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
    Read More
  • 01

    Jul

    The difference between Fisher particle size and laser particle size, and share the sample dispersion method in particle size test

    Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
    Read More
  • 28

    Jul

    Borax-ammonium chloride method is a commonly used method for synthesizing boron nitride

    This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
    Read More
  • 28

    Jul

    The boron anhydride method is a commonly used method for the synthesis of boron nitride

    The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
    Read More
  • 28

    Jul

    How to prepare and test the thermal insulation and infrared blocking properties of cesium tungsten oxide nanoparticles modified PVC film

    In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
    Read More
  • 28

    Jul

    With Cesium Tungsten bronze Nanoparticles, the Age of Smart Insulation Has Come

    Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
    Read More
  • 02

    Aug

    Comparison of thermal insulation test between cesium-doped tungsten oxide CSxWO3 glass and ordinary glass

    Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
    Read More
  • 02

    Aug

    Nano cesium tungsten oxide plays an important role in glass thermal insulation

    The promotion and application of energy-saving technologies has reached a consensus in the world, and many countries have successively issued policies. In building energy consumption, a large proportion is lost through glass doors and windows. Similarly, in the hot summer, the exposure of sunlight through the car glass is unbearable for drivers and passengers, which accelerates the aging of the ve...
    Read More
  • 11

    Aug

    A passivation layer of metallic aluminum nanoparticles for protection

    In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
    Read More
< 11 12 13 14 15 16 17 18 19 20 >
[  A total of  22  pages]
Leave a message Please click here for inquiry
Provide the right solution according to your needs,offer efficient service,leave a message for the product information and requirements you need,customize now!