-
Copper oxide powder is a brown-black metal oxide powder with a wide range of uses. Copper oxide is a multifunctional fine inorganic material with a wide range of uses, mainly used in the fields of printing and dyeing, glass, ceramics, medicine and catalysis. It can be used as a catalyst and catalyst carrier and electrode activation material, and also as a rocket propellant. As the main component o...
Read More
-
Nano zinc oxide is a new type of multifunctional fine inorganic material. Due to the small particle size, the nano-zinc oxide powder produces surface effects, small size effects, quantum effects and macro-quantum tunneling effects that the bulk material does not have, and exhibits many special properties. Such as non-toxic, non-migration, Fluorescence, piezoelectricity, antibacterial deodorization...
Read More
-
Lanthanum belongs to rare earth oxides and is one of the important products of light rare earths. Because of its good physical and chemical properties, it has been widely used in civilian, military and high-tech fields. For example, La2O has been continuously developed in the application of rare glass, ceramics, catalysts, phosphors, lasers, heating elements, cathode materials and electrical conta...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
The singular properties of nanomaterials include: ①Surface effect The surface area of a spherical particle is proportional to the square of the diameter, and its volume is proportional to the cube of the diameter, so its specific surface area (surface area/volume) is inversely proportional to the diameter. As the particle diameter becomes smaller, the specific surface area will increas...
Read More
-
Aerospace super alloy parts processing solution 1. With traditional craftsmanship in aviation blade manufacturing and processing problems, metal 3D printing technology can solve the problem ingeniously 2. At the same time, under the premise of ensuring the function, the primary requirement of the lightweight aerospace industry for parts, metal 3D printing technology can easily realize the lightwei...
Read More
-
Conductive silver paste is a low-temperature baking conductive silver paste specially designed for resistive and capacitive touch screen circuits. It is made of high-performance resin and silver powder, with good conductivity, and the content of silver particles in the conductive silver paste. Metal silver particles are the main component of conductive silver paste, and the conductive properties o...
Read More
-
In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
Read More
-
Chemical modification and dispersion is to use the surface groups of nanoparticles to form chemical bonds with reactive organic compounds. The nanoparticles are soluble in organic media due to the branched chains or groups of organic compounds on the surface. dispersion in. There are usually two ways of chemical modification: one is to use the end groups of macromolecules to chemically react with ...
Read More
-
Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
