-
Nano oxides have many unique properties and have been widely used in textile fields such as antibacterial, deodorant, and ultraviolet protection. Similarly, nano-oxides have a positive effect on anti-wrinkle finishing. Nano-titanium dioxide or nano-silica is added to the traditional system to form nano-oxide anti-wrinkle finishing liquid through high-speed shearing, so that the fabric has anti-wri...
Read More
-
By mixing a small amount of nano silica into concrete, ultra-high strength and ultra-high durability concrete can be easily prepared. At present, a large number of research results have proved that nano SiO2 has a good modification effect on cement. The cement paste doped with nano silica has reduced fluidity, shortened setting time, and significantly improved early strength. Nano-doped nano silic...
Read More
-
Because of its low density, good oxidation resistance, high temperature resistance and corrosion resistance, silicon carbide has promoted the development of silicon carbide in the field of brake pads. Silicon carbide composite material is a material that can meet the high temperature of 1650-1700 ℃. Adding silicon carbide powder in the production of brake pads can more effectively improve the stab...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, among which β type has better performance than α type. Type β has higher...
Read More
-
1. Titanium carbide tool materials AL2O3-TIC ceramics is the earliest development of composite ceramic tool system. Hard particles of nano-titanium carbide with a mass fraction of 15-40% are dispersed in the matrix, which not only improves the hardness of the material, but also improves the fracture toughness of the material. The cutting performance of the composite AL2O3-TIC ceramic tool is much ...
Read More
-
Nano silica SIO2 is an important member of nano-materials. SAT Nano is currently capable of mass production. This move is bound to be China's electronic packaging materials, polymer composite materials, ceramics, rubber, plastics, glass steel, adhesives, and sealing The upgrading of products in many industries, such as glue and coating, brings new opportunities. Nano SIO2 silica is widely used in ...
Read More
-
Nano silica SIO2 is an amorphous white powder which refers to its agglomerate material. It is a member of nano-materials. Its structure is very special and exhibits strange or abnormal physical and chemical properties. Because nano-silica SIO2 has small size effect, surface interface effect, quantum size effect, macro quantum tunneling effect and excellent light, force, electricity, heat, magnetis...
Read More
-
Black silicon carbide is made of quartz sand, petroleum coke and high-quality silica as the main raw materials, and is smelted at high temperature in a resistance furnace. The raw materials used in the manufacture of green silicon carbide, such as black silicon carbide, are roughly the same, and industrial salt is added as a reactant and accelerator to react in a resistance furnace. In terms of it...
Read More
-
Silica powder is an odorless, pollution-free inorganic non-metallic material. Because of its excellent properties such as good temperature resistance, acid and alkali corrosion resistance, high thermal conductivity, high insulation, low expansion, stable chemical properties, and high hardness, it is widely used in chemicals, electronics, integrated circuits (IC), electrical appliances, Plastics, c...
Read More
-
As a key member of non-metallic materials, ceramic materials have a large number of attractive properties, such as good mechanical and electrochemical properties, low thermal conductivity, dense and uniform structure, wear resistance and corrosion resistance, etc. The high specific stiffness, high specific strength and chemical inertness of ceramic materials in complex environments, and the low de...
Read More
-
1 Zirconium carbide is used in cemented carbide Zirconium carbide is an important high-temperature structural material with high melting point, high strength and corrosion resistance. It can improve the strength and corrosion resistance of cemented carbide. Its excellent characteristics make it have a lot of application space in cemented carbide. Using zirconium carbide instead of expensive tantal...
Read More
-
Nano SiO2 is non-toxic, odorless, non-polluting, has the advantages of high surface energy and strong adsorption capacity. It is a high-quality stabilizer and fusion machine, and has a wide range of applications in the fields of electronics, optics, and biochemical sciences. It is a nano material with great industrial application prospects. Nano silica has the advantages of small particle size, la...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
