-
1. The world's first graphene car in Manchester came out July 22, the world's first use of graphene as a body material car debut in Manchester, by the Briggs car company in Liverpool. The BAC Mono sports car with graphene-added material has passed the road test and will be shown at the National Graphene Research Center in Manchester as part of the City Science Festival on July 22-29. "The graphene...
Read More
-
Known as the "king of new materials", Graphene nanoparticles not only attracts the attention of the society in the fields of electronic products, new energy batteries, and aerospace, but is also regarded as the key to the next medical transformation in the medical field. Recently, the research team at the University of Olomouc in the Czech Republic announced the use of graphene to develop the worl...
Read More
-
The first reason is to change the inorganic filler from a general incremental filler to a functional filler. Inorganic fillers play an important role in the polymer materials industry and polymer matrix composites such as plastics, rubber and adhesives. Application and function of partially modified inorganic filler Inorganic filler Application Function Calcium carbonate PVC,PE, PP, Unsa...
Read More
-
As the anode material of lithium ion battery, silicon nanopowder has the highest theoretical specific capacity (up to 4200 mAh/g), which is much higher than the carbon powder widely used at present, but the biggest disadvantage of silicon powder as the negative electrode of lithium ion battery is the process of alloying with lithium. In the case of a large volume change, the active material is det...
Read More
-
1)Silicon carbide whiskers should be pre-dispersed as much as possible before use. They should be mechanically and ultrasonically dispersed with water, ethanol, etc., and then mixed with the matrix material. 2) The amount of silicon carbide whiskers added to the material is not as high as possible, and there is usually an optimum value. Ordinary ceramics are generally added in an amount of 1-10%. ...
Read More
-
Specification of titanium dioxide nanopowder: The particle size is very small: an average particle size of 5 nm. Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air. High catalyt...
Read More
-
Nano silica powder is a filler for reinforcing high-temperature vulcanized silicone rubber. The silica nanopowder aggregates have a good reinforcing effect on the silicone rubber. After adding SAT NANO nano silica powder to the rubber, a microcrystalline region with silica as a nucleus is formed, which increases the physical cross-linking point. Crystallization is more likely to occur and the stre...
Read More
-
A preparation method of a high-capacity silicon powder doped lithium battery anode slurry, which improves the capacity of the material by adding silicon nanopowder in the preparation process of the conventional anode slurry, and can meet the requirement of high energy density of the lithium ion battery And through the steps of thickener solution preparation, dispersing powder, high viscosity stirr...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The addition of nano SiO2 powder as an admixture to cement-based materials can improve many of the properties of cement-based materials. A large number of research results show that adding appropriate amount of SiO2 nanopowder to cement-based materials, due to the volcanic ash effect of nano SiO2 particle, nucleation effect and micro-filling effect, can significantly improve the early strength of ...
Read More
-
Cubic silicon carbide, Beta SiC, is a synthetic high-performance material (only a small amount of high-purity cubic silicon carbide exists in nature). It is called "cube" because its structure belongs to the cubic system (diamond crystal). This structure also determines its own superior physical and chemical properties. B-SiC has a Mohs hardness range of 9.5 to 9.75, which is close to the most Moh...
Read More
-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
