-
The chemical reduction method of silver coated copper powder refers to the process of using a reducing agent to reduce the ions in the main salt to elemental form and depositing on the surface of the substrate with autocatalytic ability in a metastable solution system. When the reducing agent is oxidized on the catalytically active surface, free electrons are generated. These free electrons can re...
Read More
-
The displacement reaction method is a common process for processing silver-coated copper powder. Because the surface activity of copper powder is very large, it is easy to oxidize, so it must be pretreated before coating the copper powder. 1. Put the required amount of copper powder into the pretreatment tank, and then wash with 15% 30% dilute sulfuric acid to keep the pH of the solution at 3 2. W...
Read More
-
In recent years, silver coated copper powder has been widely used, not only as the electrode of chip electronic components, but also in the fields of catalyst and electronic paste. At present, the electronic paste used in my country is basically micron-level pure silver powder, which is expensive and mainly imported. Micron sterling silver powder has the problem of particle sedimentation in the la...
Read More
-
The silver plated copper powder adopts electroless plating technology to form silver plating with different thicknesses on the surface of ultra-fine copper powder and nickel powder; it has good oxidation resistance, good electrical conductivity, low resistivity, high dispersion and high stability. Silver plated copper powder is an ideal conductive powder and is an ideal material for low cost and h...
Read More
-
Chemical modification and dispersion is to use the surface groups of nanoparticles to form chemical bonds with reactive organic compounds. The nanoparticles are soluble in organic media due to the branched chains or groups of organic compounds on the surface. dispersion in. There are usually two ways of chemical modification: one is to use the end groups of macromolecules to chemically react with ...
Read More
-
Nanoparticles have a special surface structure, which lacks adjacent coordinating atoms on the surface, and has high activity, so it is easy to agglomerate. Due to the strong self-absorption property among nanomaterial particles, the agglomeration of nanoparticles is inevitable. Aggregates can be divided into two types: hard agglomerates and soft agglomerates. The formation process of agglomerates...
Read More
-
Particle size: The size of the particles is called particle size, usually the particle size of spherical particles is expressed by diameter/particle size, and the particle size of cubic particles is expressed by side length. Particle size is the diameter of a particle. However, most of the particles in practice are irregular. Therefore, in order to describe the size of the particles more convenien...
Read More
-
Nanomaterials exhibit many exotic properties that traditional materials do not have. The first thing we need to know is that the nanometer (mainly refers to less than 100nm) of the composition of nanomaterials has four major effects: 1. Small size effect The boundary conditions of the crystal periodicity are destroyed; the atomic density near the surface layer of the amorphous nanoparticle decreas...
Read More
-
The size of the particles is called the particle size of the particles, which may also be referred to as particle size. Particle size or particle size refers to particle diameter. Of course, for non-spherical particles, the particle size is related to the measurement criteria and statistical methods, and the particle size can only be "equivalent". The percentage (or cumulative percentage) of parti...
Read More
-
The particle size of nano-level silver powder is usually between 20nm and 100nm. The performance of nano-silver powder is directly related to the particle size. The study found that the smaller the particle size, the higher the valence state, and the stronger the bactericidal performance. What are the important factors affecting the performance of nano-silver powder? Common metal activity sequence...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
