-
BN-SAT08 High-temperature Release Agent Product Characteristics Environment Friendly: Boron nitride is environmentally friendly, non-toxic, non-polluting Chemical Properties: Strong non-stick properties in high temperature environment, stability in high temperature Physical Properties: Electrical insulator, low dielectric constant, good thermal conductivity and high lubricity Product Fe...
Read More
-
A preparation method of a high-capacity silicon powder doped lithium battery anode slurry, which improves the capacity of the material by adding silicon nanopowder in the preparation process of the conventional anode slurry, and can meet the requirement of high energy density of the lithium ion battery And through the steps of thickener solution preparation, dispersing powder, high viscosity stirr...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The organic/inorganic nanocomposite formed by dispersing the inorganic filler in a nanometer size in a general plastic matrix is called nanoplastic. In nanocomposites, nano-plastics have excellent properties such as high strength, heat resistance, high barrier properties, flame retardancy and excellent processability due to the nano-size effect of the dispersed phase, large specific surface area a...
Read More
-
The addition of nano SiO2 powder as an admixture to cement-based materials can improve many of the properties of cement-based materials. A large number of research results show that adding appropriate amount of SiO2 nanopowder to cement-based materials, due to the volcanic ash effect of nano SiO2 particle, nucleation effect and micro-filling effect, can significantly improve the early strength of ...
Read More
-
Cubic silicon carbide, Beta SiC, is a synthetic high-performance material (only a small amount of high-purity cubic silicon carbide exists in nature). It is called "cube" because its structure belongs to the cubic system (diamond crystal). This structure also determines its own superior physical and chemical properties. B-SiC has a Mohs hardness range of 9.5 to 9.75, which is close to the most Moh...
Read More
-
Pure silicon carbide powder is a colorless, transparent crystal. Industrial silicon carbide is light yellow, green, blue or even black due to the type and content of impurities contained in it. The transparency varies with its purity. The crystal structure of silicon carbide is divided into hexagonal or rhombohedral α-SiC and cubic β-SiC (called cubic silicon carbide). Since α-SiC constitutes...
Read More
-
The silicon carbide nanopowder has high purity, small particle size distribution range and high specific surface area; nano-silicon carbide has stable chemical properties, high thermal conductivity, small thermal expansion coefficient, high hardness and Mohs hardness of 9.5. Nano silicon carbide wear-resistant, high temperature resistant, corrosion resistant, acid and alkali resistant solvents. 1....
Read More
-
New energy vehicles, communications and portable devices require lithium-ion batteries for high capacity and high endurance. Lithium-ion batteries urgently need to be updated to increase capacity, cycle and size. At present, the silicon-carbon negative electrode of lithium battery is all kinds of carbon materials mainly composed of graphite, and its theoretical capacity is only 372 mAh/g. In pract...
Read More
-
First, the advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides such as cerium oxide, cerium oxide, calcium oxide, magnesium oxide. The stability of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria doped zirconia has good comprehensive properties and is the...
Read More
-
Silicon nitride Si3N4 is a non-oxide high temperature ceramic structural material. Powdered Si3N4 can be prepared by reacting a mixture of SiCl4 vapor and NH3 gas. Powdered Si3N4 is unstable to air and water. Powdered Si3N4 can form a pungent odor, a gas commonly used as a refrigerant and a poorly soluble acid when it is in contact with water. Powdered Si3N4 can generate N2 and contact with air. a...
Read More
-
Since ultrafine powder has surface effect, small size effect, quantum effect and macroscopic quantum tunneling effect, it has many special properties in catalytic, optical, magnetic and mechanical properties compared with crystalline materials of the same composition. There are many important applications in the fields of medicine, microelectronics, and nuclear technology. "Plasma milling" refers ...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
