-
In building energy conservation, the light transmission and heat insulation of glass is a very critical issue. In buildings with transparent ceilings and large-area exterior windows, the thermal radiation of sunlight will lead to an increase in the energy consumption of air conditioners, resulting in a large energy waste. In order to improve this phenomenon, nano-scale antimony doped tin oxide ATO...
Read More
-
Transmission Electron Microscope (TEM) Transmission electron microscopy uses an electron beam that penetrates a sample to image, which requires the sample being observed to be "transparent" to the incident electron beam. Transmission electron microscopy is widely used in materials science and biology. Since electrons are easily scattered or absorbed by objects, the penetration is low, and the dens...
Read More
-
This is a method of synthesizing boron nitride by reacting borax and ammonium chloride as the main raw materials in an ammonia atmosphere. The two raw materials should be dehydrated and recrystallized separately before participating in the reaction. Borax is best dehydrated in a vacuum at 200~400°C. The recrystallization of ammonium chloride is to dissolve it into a saturated solution, filter to r...
Read More
-
The synthesis of boron nitride by nitridation with boron anhydride (B4O3) is one of the important methods for industrial production of boron nitride. Due to the low melting point of boron anhydride (glass state is 294°C, crystalline state is 450-600°C), it becomes a high-viscosity melt at the nitriding temperature, which hinders the flow of ammonia and makes the reaction slow and extremely incompl...
Read More
-
In summer, the sun is strong, and the sunlight enters the room through the glass, causing the temperature in the car to rise sharply, which seriously affects the comfort of living and vehicle riding. Among them, the energy in the infrared band accounts for the largest proportion, and it is also the main source of energy for the temperature increase in the place where the sunlight is irradiated. By...
Read More
-
Glass thermal insulation coating is a kind of coating prepared by one or more nano powder materials. The nano materials used have special optical properties, that is, they have high blocking rate in the infrared region and ultraviolet region. , has a high transmittance in the visible region. Using the transparent and heat-insulating properties of the material, it is mixed with an environmentally f...
Read More
-
Infrared light has an obvious thermal effect, which can easily lead to an increase in ambient temperature. Ordinary architectural glass has no thermal insulation effect, and can only be achieved by means of filming. Therefore, architectural glass, car film, outdoor facilities and other surfaces need to use thermal insulation materials to achieve the effect of thermal insulation and energy saving. ...
Read More
-
The promotion and application of energy-saving technologies has reached a consensus in the world, and many countries have successively issued policies. In building energy consumption, a large proportion is lost through glass doors and windows. Similarly, in the hot summer, the exposure of sunlight through the car glass is unbearable for drivers and passengers, which accelerates the aging of the ve...
Read More
-
ICP-MS Inductively Coupled Plasma Mass Spectrometer is an analytical instrument that combines ICP technology and mass spectrometry. It can simultaneously measure dozens of trace elements. The instrument covers a wide range of elements, including alkali metals, alkaline earth metals, transition Metals and other metalloids, rare earth elements, most halogens and some non-metallic elements. Principle...
Read More
-
In the process of powder storage, transportation and use, it is often hoped that the nano-aluminum powder exhibits low activity and is less affected by external environmental factors (temperature, humidity, etc.), so that the product has stable performance for a long time. On the other hand, it is desirable to exhibit high activity in solid rocket propellants to obtain high energy release rate and...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. It has a Mohs hardness of about 9.5. Black glossy crystals. The hardness is lower than that of industrial...
Read More
-
Boron carbide, also known as black diamond, is an inorganic substance with a chemical formula of B4C, usually a gray-black micropowder. It is one of the three hardest known materials (after diamond and cubic boron nitride) and is used in tank armor, body armor and many industrial applications. Several preparation methods of nano-boron carbide (supply 100-200nm): 1. Carbothermal reduction method Be...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
