-
Ultra fine silicon carbide powder is an excellent inorganic material with excellent characteristics such as high chemical inertness, high hardness, and high melting point, making it widely used in the manufacturing industry. However, due to its low surface activity, it is difficult to achieve its excellent performance in certain industrial application scenarios. Therefore, the study of surface mod...
Read More
-
Aluminum powder is a commonly used filler, widely used in fields such as thermal interface materials and industrial coatings. However, traditional aluminum powder has problems such as high viscosity, poor dispersibility, and poor thermal stability, which limit its effectiveness in some special applications. To address these issues, researchers have carried out many modification methods to improve ...
Read More
-
In recent years, there has been a trend of oil-based lubricants being replaced by water-based lubricants. Boron nitride coatings are often used in forging nickel based alloys, high melting point alloys, and titanium machined parts, which not only provide lubrication but also prevent workpiece oxidation. Characteristics that forging lubricants should possess 1. Evenly moisten the surface to prevent...
Read More
-
(1) Particle size characterization Particles disperse in liquid to form a suspension system. The smaller the particle size and the more stable it becomes over time, the better its dispersion and less likely it is to agglomerate. Particle size characterization is commonly used to characterize the particle dispersion before and after surface modification. The better the dispersion of particles, the ...
Read More
-
Carbon nanotubes (CNTs) reinforced aluminum composites with unique intragranular dispersion were obtained using ultra short carbon nanotubes, and nanoscale carbon nanotubes were uniformly distributed within ultrafine aluminum grains. Compared with typical CNT/Al composite materials with intergranular carbon nanotube dispersion, this intragranular carbon nanotube/aluminum composite material has str...
Read More
-
1. Antibacterial agents and their classification Antibiotics refer to drugs that can inhibit bacterial growth, damage their living environment, and effectively and continuously exert their effects. Antibacterial agents are divided into two categories: organic antibacterial agents and inorganic antibacterial agents. Among them, organic antibacterial agents include natural and synthetic types, while...
Read More
-
Nickel based high-temperature alloy powder are a type of metal material specially designed to withstand high temperature, high pressure, and corrosive environments, and are very suitable for use under extreme conditions. They are mainly composed of nickel, chromium, and iron, and elements such as molybdenum, cobalt, niobium, titanium, and aluminum are often added to enhance their performance. Clas...
Read More
-
Copper powder and copper alloys powder have excellent physical and chemical properties, such as high conductivity, thermal conductivity, and corrosion resistance, and are widely used in the power industry, thermal management systems, nuclear power plants, and aerospace industry. High strength, wear-resistant, and corrosion-resistant copper alloys are used for automotive parts and daily necessities...
Read More
-
Titanium dioxide is mainly divided into three types: plate titanium dioxide, anatase titanium dioxide, and rutile titanium dioxide. Rutile titanium dioxide and anatase titanium dioxide are two important types of titanium dioxide, which are currently the most widely used in the market. However, their properties differ greatly. Difference in Chemical property Titanium dioxide has extremely stable ch...
Read More
-
The specific surface area of a powder is an important physical property, which refers to the total surface area (in square meters) of an oxide powder per unit mass (in grams). The size of the specific surface area is related to factors such as particle size, shape, and porosity of the powder. Generally speaking, the smaller the particles and the higher the porosity, the larger the specific surface...
Read More
-
The preparation method is one of the key factors affecting the specific surface area of oxide powders. Different preparation methods can lead to differences in the size, shape, and porosity of powder particles, thereby affecting their specific surface area. For example, the sol gel method can prepare oxide powders with high specific surface area, uniform particle size and fine size; The co precipi...
Read More
-
As one of the most important characterization parameters of nano powder, particle size directly affects the physical and chemical properties of the powder, and then affects the performance of the final product. Therefore, its detection technology is an important tool for industrial production and quality management, and plays an irreplaceable role in improving product quality, reducing production ...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
