-
1. Introduction to the characteristics of nano copper oxide Copper oxide powder is a brown-black metal oxide powder with a wide range of uses. Ordinary copper oxide is a multifunctional fine inorganic material with a wide range of uses, mainly used in printing and dyeing, glass, ceramics, medicine, catalysis and other fields. It can be used as a catalyst and catalyst carrier and electrode activati...
Read More
-
Lanthanum belongs to rare earth oxides and is one of the important products of light rare earths. Because of its good physical and chemical properties, it has been widely used in civilian, military and high-tech fields. For example, La2O has been continuously developed in the application of rare glass, ceramics, catalysts, phosphors, lasers, heating elements, cathode materials and electrical conta...
Read More
-
Compared with traditional ceramic materials, ceramics sintered with nano titanium oxide produced by SAT NANO have the following characteristics: 1. Mechanical properties The mechanical properties of nano-oxide ceramics include the hardness, fracture toughness and low-temperature ductility of nano-ceramic materials. Especially the hardness and strength are greatly improved at high temperature, and ...
Read More
-
Refractory materials refer to inorganic non-metallic materials with a refractoriness exceeding 1580°C. Refractoriness refers to the Celsius temperature at which the refractory cone sample resists the action of high temperature without softening and melting under no load. There are many types of refractory materials. According to the chemical characteristics, it can be divided into acidic refractor...
Read More
-
Nano zinc oxide materials have been successfully applied to textiles in many fields such as medical, health, and health care. The antibacterial mechanism of nano zinc oxide is actually the result of the combined action of photocatalysis and metal ion dissolution. Finishing process: weigh 3g low poly sodium polyacrylate, adjust the pH to 9-10 with 10% ammonia water, add 80g water and 1.5g nano zinc...
Read More
-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
1. Nano cerium oxide improves the anti-ultraviolet aging performance of polymers The 4f electronic structure of nano CeO2 is very sensitive to light absorption, and the absorption band is mostly in the ultraviolet region (200-400nm). It has no characteristic absorption of visible light and has good transmittance. Ordinary ultra-fine CeO2 for UV absorption has long been used in the glass industry: ...
Read More
-
1. Nano zinc oxide is an active agent and vulcanizing agent for rubber. Due to the small size effect and large surface effect of nano-materials, the function of nano-zinc oxide in rubber formulations is not only a high-active agent, but also improves wear resistance. It can improve the adhesive force of the rubber frame material, increase the deformation ability and reduce the heat generation and ...
Read More
-
Application Analysis of Nano Tungsten Trioxide Nano WO3 yellow tungsten has a large specific surface area and significant surface effect. It is a good catalyst. It can be used as both a main catalyst and an auxiliary catalyst, and it has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and r...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
Carbon nanotubes are simply classified according to the number of layers of graphene sheets: single-walled carbon nanotubes and multi-walled carbon nanotubes. The difference between the two is mainly reflected in: 1. Discover the time difference In 1991, when Li Ji-ma, an electron microscope expert in the Basic Research Laboratory of NEC Corporation, Japan, observed the C60 structure under a high-...
Read More
-
Nano sized hydroxyapatite has stable performance under physiological environment, and its ability to induce new bone formation is unmatched by other materials. It is widely used in human bone bionic regeneration materials and hydroxyapatite coatings. Bone is the stent of the human body, participates in the metabolism of the whole body, and is an important part of the human movement system. However...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
