-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
1. Nano cerium oxide improves the anti-ultraviolet aging performance of polymers The 4f electronic structure of nano CeO2 is very sensitive to light absorption, and the absorption band is mostly in the ultraviolet region (200-400nm). It has no characteristic absorption of visible light and has good transmittance. Ordinary ultra-fine CeO2 for UV absorption has long been used in the glass industry: ...
Read More
-
1. Nano zinc oxide is an active agent and vulcanizing agent for rubber. Due to the small size effect and large surface effect of nano-materials, the function of nano-zinc oxide in rubber formulations is not only a high-active agent, but also improves wear resistance. It can improve the adhesive force of the rubber frame material, increase the deformation ability and reduce the heat generation and ...
Read More
-
Application Analysis of Nano Tungsten Trioxide Nano WO3 yellow tungsten has a large specific surface area and significant surface effect. It is a good catalyst. It can be used as both a main catalyst and an auxiliary catalyst, and it has a high selectivity to the reaction. WO3 has a strong ability to absorb electromagnetic waves and can be used as an excellent solar energy absorbing material and r...
Read More
-
Silicon carbide whiskers are cubic whiskers and belong to the same crystal type as diamond. It is the whisker product with the highest hardness, the highest modulus, the highest tensile strength, and the highest heat-resistant temperature among the whiskers that have been synthesized. There are two forms of α type and β type, and the performance of β type is better than that of α type. Type β has ...
Read More
-
Nano sized hydroxyapatite has stable performance under physiological environment, and its ability to induce new bone formation is unmatched by other materials. It is widely used in human bone bionic regeneration materials and hydroxyapatite coatings. Bone is the stent of the human body, participates in the metabolism of the whole body, and is an important part of the human movement system. However...
Read More
-
Car intake manifold solution 1. The accuracy is +/-0.1mm, and the layer thickness of 0.02 fully meets the requirements of dimensional design verification 2. Using PA3200 nylon mixed glass fiber material, it has high strength, high toughness, and high temperature resistance, which fully meets the requirements of functional design verification 3. All parts are produced and printed at one time, no sp...
Read More
-
Dental restoration parts customization Solution 1. Personalized and complex geometric products are the areas where metal 3D printing technology is best at, ensuring a good match with the patient’s mouth, and the surface roughness of the parts is very suitable for the adhesion between the ceramic outer layer and the body 2. Cobalt-chromium alloy is used for printing materials, which has good biolog...
Read More
-
Conductive glue is composed of non-conductive resin and conductive filler. Since epoxy resin has excellent mechanical and thermal properties, low shrinkage, good bonding ability, resistance to mechanical and thermal shock, and strong resistance to humidity, solvents and chemical reagents, epoxy resin The resin system conductive adhesive is the most researched. As the key material of conductive adh...
Read More
-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
The singular properties of nanomaterials include: ①Surface effect The surface area of a spherical particle is proportional to the square of the diameter, and its volume is proportional to the cube of the diameter, so its specific surface area (surface area/volume) is inversely proportional to the diameter. As the particle diameter becomes smaller, the specific surface area will increas...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
