-
1. The history of nano gold powder development In 1885, nano gold solution was often used as the main ingredient in the treatment of alcoholism in the United States; In 1890, Dr. Koch discovered that Mycobacterium tuberculosis could not survive on the surface of gold; Nano gold was used to treat arthritis in 1890; In 1935, Chicago surgical expert Edward et al. discovered that nano-gold solution ca...
Read More
-
In order to obtain the correct data of the primary particle size, it is often necessary to open the agglomerated particles in the particle size test to form a particle monomer and keep it uniformly dispersed in the medium. This operation is called "dispersion". The requirement of the laser particle size analyzer for the dispersion system is "dispersion without segregation". Dispersion techniques a...
Read More
-
1.physical properties Appearance and properties: black or black-brown crystalline or amorphous powder Relative molecular mass: 86.94 Chemical formula: MnO2 Melting point (℃): 535 (decomposition) Relative density (water=1) 5.03 Boiling point (°C): 535°C Solubility: insoluble in water, insoluble in nitric acid Storage: Store in an airtight and cool place 2.chemical properties Manganese dioxide is th...
Read More
-
Fisher's method is a relatively simple particle size measurement method, which is based on measuring the speed of air passing through the powder accumulation, and then obtaining the average particle size of the powder according to the Kozeny-Carman formula. However, the Fisher method is a relative measurement method, which cannot accurately determine the true particle size of the powder, and is on...
Read More
-
The application in plastics utilizes the high strength, high fluidity and small size effect of silica, which can improve the compactness, smoothness and wear resistance of plastic products. Through appropriate surface modification, the purpose of strengthening and toughening plastics can be achieved at the same time. By adding fumed silica into polyethylene, through a special method, the silica ca...
Read More
-
According to the pH range, the transparent dispersion of nano-silica can be divided into basic transparent dispersion of nano-silica (PH=8-11), neutral transparent dispersion of nano-silica (pH=6-8) and acidic transparent dispersion of nano-silica (pH=1-5). SAT NANO adopts a special process and dispersion process to prepare a series of nano-silica transparent dispersion products with good dispersi...
Read More
-
Silicon nanowires (SiNW), as a novel one-dimensional nanomaterial with high specific surface area and high stability, have received attention and research in the field of sensors. With the optimization of the preparation process and diversification of modification methods of nanosilicon wires, biosensors using nanosilicon wires as carriers have been applied in various fields such as metal ion dete...
Read More
-
Nano metal powders have broad application prospects in fields such as electronics, magnetic materials, automotive industry, military industry, and powder metallurgy. For example, nano materials such as iron, aluminum, zinc, titanium, nickel, chromium, tantalum, cobalt, and so on have been produced. The most important factor in achieving optimal performance of nanometallic powders is the uniform di...
Read More
-
1. Mechanical properties Due to the fact that nanomaterials are composed of nanoparticles, and when the particles are at the nanoscale, the strength, hardness, and other mechanical properties of the material will increase as the particle size decreases. It is precisely because of this property of nanomaterials that they can be used for certain packaging that requires strength and hardness, solving...
Read More
-
How to dilute nano silver dispersion from high concentration to low concentration? How much deionized water should be added? Nano silver dispersion is an important nano material with various applications such as sterilization and anti-corrosion. When using this material, it is sometimes necessary to dilute the high concentration dispersion to obtain the desired low concentration. So how should dil...
Read More
-
With the continuous development of nanotechnology, nano powder dispersion, as an important nano material, has attracted more and more attention. SAT NANO, as a company specializing in the production of nano materials, provides high-quality nano powder dispersion. This article will introduce the conversion of PPM, PPB, and PPT in solutions and their respective meanings. PPM stands for "Parts per mi...
Read More
-
(1) Particle size characterization Particles disperse in liquid to form a suspension system. The smaller the particle size and the more stable it becomes over time, the better its dispersion and less likely it is to agglomerate. Particle size characterization is commonly used to characterize the particle dispersion before and after surface modification. The better the dispersion of particles, the ...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
