-
First, the advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides such as cerium oxide, cerium oxide, calcium oxide, magnesium oxide. The stability of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria doped zirconia has good comprehensive properties and is the...
Read More
-
Refractory materials refer to inorganic non-metallic materials with a refractoriness exceeding 1580°C. Refractoriness refers to the Celsius temperature at which the refractory cone sample resists the action of high temperature without softening and melting under no load. There are many types of refractory materials. According to the chemical characteristics, it can be divided into acidic refractor...
Read More
-
Under the situation of rapid development of science and technology, to prepare high-temperature, high-performance, new-type materials, the first thing to do is to solve the refractory materials needed in the preparation process. The characteristics of refractory materials are as follows: 1. Mechanical properties The elastic modulus of special refractory materials is large. Most have higher mechani...
Read More
-
1. The advantages of yttria stabilized zirconia YSZ Common zirconia stabilizers are usually alkaline earth oxides or rare earth oxides, such as yttrium oxide, cerium oxide, calcium oxide, and magnesium oxide. The essence of these stabilizers to stabilize zirconia is roughly similar, but the performance is different. In application, yttria-doped zirconia has good comprehensive properties, and is al...
Read More
-
As a new material of the technological revolution, ceramic materials have attracted the attention of some developed countries as early as more than ten years ago. The fatal shortcomings of ceramic materials are its brittleness, low reliability and low repeatability. These shortcomings have seriously affected the application range of ceramic materials. Only by improving the fracture toughness of ce...
Read More
-
Open your mouth and align the teeth with a 3D scan, and the 3D printer can print a zirconia ceramic denture. Before the advent of 3D printing technology, people needed to bite out the dental membrane to make a denture, and then sent it to the factory for production, and repeated carving, the production cycle was longer, and 3D printing technology not only improved efficiency, but also greatly save...
Read More
-
The phase change toughening of yttrium stabilized nano zirconia and the toughening effect of nanoparticles are used to improve the comprehensive mechanical properties of the alumina matrix. Adding different contents of nano 3Y-ZrO2 to the alumina matrix, the comprehensive mechanical properties of the material with a content of 15wt% of nano ZrO2 reach the best (flexural strength 766.74MPa, fractur...
Read More
-
Nano zirconia has important application value in national defense, electronics, high-temperature structural and functional ceramics, especially in high-tech fields such as surface coatings. The unique low thermal conductivity of nano-zirconia is an excellent material for thermal insulation coatings to improve the thermal insulation effect. Its high corrosion resistance, high hardness and high wear...
Read More
-
Nano powder has various applications in modern industry. One of them is added to printing inks and coatings to provide UV resistance. Because of its very small size and high specific surface area, nano powder can bring remarkable effect in a very small amount. So, what nano powders can be added to printing inks and coatings to play the role of UV resistance? This article will provide you with a br...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
