-
Preparation of kerosene-based magnetic fluid of Fe3O4 In this experiment, analytically pure ferric chloride, ferric chloride and ammonia (NH3 content 25%) were used to prepare magnetic particles of Fe3O4 according to chemical coprecipitation method. The chemical reaction equation is 2FeCl3·6H2O+FeCl2·4H2O+8NH3·H2O= Fe3O4+8NH4Cl+24H2O (1) In the dissolution process, FeCl2·4H2O blue-green crystals a...
Read More
-
As the anode material of lithium ion battery, silicon nanopowder has the highest theoretical specific capacity (up to 4200 mAh/g), which is much higher than the carbon powder widely used at present, but the biggest disadvantage of silicon powder as the negative electrode of lithium ion battery is the process of alloying with lithium. In the case of a large volume change, the active material is det...
Read More
-
Copper nanopowder has a spherical shape, uniform particle size, large crystallinity, high product purity, high surface activity, easy dispersion and industrial application. Ultrafine particulate material refers to a powder having a particle size between 1 and 100 nm, also known as a nanoparticulate material. Nanoparticles have small size effects, large specific surface and macroscopic quantum tunn...
Read More
-
As a drug carrier: Hydroxyapatite nanopowder have many advantages such as good biocompatibility, low pH sensitivity, controllable structure, large drug loading and high encapsulation efficiency, and are widely used as drug carriers. At the same time, the synthetic hydroxyapatite is surface-modified to load a specific drug, and can also solve the problem of release of drug release. Hydroxyapatite i...
Read More
-
As a sensor material: TiO2 nanopowder can be used not only for moisture sensitive and pressure sensitive components, but also as a sensor material for detecting multiple gases. TiO2 nanoparticle as a catalyst carrier: Since researchers discovered strong interactions between certain metals and TiO2 carriers in 1978, most of the scientists in the field of catalysts in various countries have used TiO...
Read More
-
Specification of titanium dioxide nanopowder: The particle size is very small: an average particle size of 5 nm. Good dispersion performance: 5 nm titanium dioxide has good dispersibility and can be self-dispersed into pure water without stirring. The dispersed liquid can be sprayed onto the surface of the furniture and the wall to form a uniform nano-coating to purify the indoor air. High catalyt...
Read More
-
Physical properties of tantalum powder The thickness of Ta powder is due to the atomic number of Ta being 73, the atomic mass is close to 181, the density is 16.65g/m3, the texture is blue-gray, the hardness is 6-6.5, and the melting point is as high as 2996°C, second only to carbon, Tungsten, tantalum and niobium; Tantalum is a rare transition metal suitable for replacing platinum as a laboratory...
Read More
-
Nano silica powder is a filler for reinforcing high-temperature vulcanized silicone rubber. The silica nanopowder aggregates have a good reinforcing effect on the silicone rubber. After adding SAT NANO nano silica powder to the rubber, a microcrystalline region with silica as a nucleus is formed, which increases the physical cross-linking point. Crystallization is more likely to occur and the stre...
Read More
-
1, thermal silica gel and thermal epoxy resin Ultra-high thermal conductivity nano AlN composite silica gel has good thermal conductivity, good electrical insulation, wide electrical insulation temperature (operating temperature -60 ° C - 200 ° C), low consistency and good construction performance. The products have reached or exceeded the imported products, because they can replace the similar im...
Read More
-
A preparation method of a high-capacity silicon powder doped lithium battery anode slurry, which improves the capacity of the material by adding silicon nanopowder in the preparation process of the conventional anode slurry, and can meet the requirement of high energy density of the lithium ion battery And through the steps of thickener solution preparation, dispersing powder, high viscosity stirr...
Read More
-
First, powder materials are the key to 3D printing ceramic technology Additive manufacturing (3D printing) is known as the third industrial revolution. For ceramic materials, the properties of raw material powders (such as purity, particle size and distribution, particle morphology, etc.) have a direct impact on the performance of ceramics. . Ideally, the components are characterized by fine contr...
Read More
-
The organic/inorganic nanocomposite formed by dispersing the inorganic filler in a nanometer size in a general plastic matrix is called nanoplastic. In nanocomposites, nano-plastics have excellent properties such as high strength, heat resistance, high barrier properties, flame retardancy and excellent processability due to the nano-size effect of the dispersed phase, large specific surface area a...
Read More
13929258449
online service
13929258449
admin@satnano.com
led_zhiding
+ 8613929258449
